All the wireless devices you want to connect to the network must have the same security settings including the pass phrase or key that you use to secure your wireless network.

USRobotics strongly recommends that you enable some form of wireless security so that unauthorised clients are not able to access your network. In this section you can enable the wireless security features. Please refer to your browser’s documentation for instructions on how to This browser either doesn’t support scripting or has scripting disabled. * Only the single-pack of the UAP-nanoHD includes a PoE adapter.This USRobotics User Guide uses scripting to display its information correctly. Connecting to a PoE SwitchĬonnect the Ethernet cable from the UniFi AP directly to an 802.3af-compliant port on the switch. For multi-pack units, PoE adapters or a UniFi Switch with PoE may be purchased separately. The single-pack of the UAP-nanoHD includes one Gigabit PoE adapter.

Ubiquiti Gigabit PoE Adapter (48V, 0.3A).

The UAP-nanoHD features auto-sensing 802.3af PoE support and can be powered by any of the following: Perform the steps for the appropriate installation. The device can be mounted on the wall or ceiling. Note: If you need to remove the UniFi AP from the Mounting Bracket, insert a paper clip in the Slot to release the Locking Tab and turn the UniFi AP counterclockwise. If your Ethernet cable feeds along the mounting surface, remove the Cable Feed Plug.ĭuring installation, the Locking Tab on the Mounting Bracket moves from the Initial Position to the Final Position, where the Locking Tab fits securely into the Locking Notch on the UniFi AP to help prevent theft. This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.

Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

Restart Press and release the Reset button quickly.

The Reset button serves two functions for the UniFi AP: (This is described further in the Mounting Bracket section.)

The Locking Notch will be used with the Mounting Bracket to help secure the UniFi AP. UniFi Controller software v5.7 or higher (available at: ui.com/download/unifi).Web Browser: Google Chrome (Other browsers may have limited functionality.).Java Runtime Environment 1.8 (or above).Microsoft Windows 7/8/10, Mac OS X, or Linux.IMPORTANT: The UAP-nanoHD requires the UniFi Controller v5.7 or higher, available at: ui.com/download/unifi Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed).Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting).* Included only in the single-pack of the UAP-nanoHD.

Aes wpa2 wpa tkip wep